MESSAGE
| DATE | 2013-04-03 |
| FROM | Ruben Safir
|
| SUBJECT | Re: [NYLXS - HANGOUT] gma500 video and frame buffer and openSuSE
|
On Wed, Apr 03, 2013 at 05:38:38PM -0400, Paul Robert Marino wrote:
> Rubin that bug report is not for the vesafb driver its for a specific Intel driver.
Try downgrading your kernel or blacklist the driver and force load the vesafb driver.
-- Sent from my HP Pre3
On Apr 3, 2013 4:49 PM, Ruben Safir <mrbrklyn-at-panix.com> wrote:
Hello
I have a fit/PC which has a Intel GMA500 Poulsbo video chip in it. It
doesn't function correctly as can be seen in this bug report
http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html
The device is connected to a DVI connected screen and everything is
scrunched up into the upper left hand corner of the screen. I think it
is running through the VESA frame buffer? The device is running on an
updated openSuSE 12.2. I managed to get the system to not run through
the frame buffer, giving me full console at least, not no X capability.
Since I've been using it as a server, that has been fine. But know
after the latest upgrade, the boot screen has changed and the viewport
is squashed into the corner again.
The chips worked with openSuSE 11.3, so I don't even know how it is now
working, but please, it is possible, let me know if there is a kernel
driver i can install to make it work with X11 properly, or get rid of
the frame buffer permanently this time.
Ruben
PS -
Reference:
http://lizards.opensuse.org/2011/04/12/intel-gma500-poulsbo-drivers-and-opensuse/
http://lists.opensuse.org/opensuse-bugs/2013-03/msg04778.html
hwinfo output:
hid 81709 1 usbhid, Live 0xf81c5000
uhci_hcd 35656 0 - Live 0xf815f000
poulsbo 12553 0 - Live 0xf8115000
ehci_hcd 59456 0 - Live 0xf832b000
usbcore 194042 4 usbhid,uhci_hcd,ehci_hcd, Live 0xf8194000
usb_common 12526 1 usbcore, Live 0xf8110000
gma500_gfx 138256 1 - Live 0xf80ed000
drm_kms_helper 45454 1 gma500_gfx, Live 0xf80e0000
drm 232083 2 gma500_gfx,drm_kms_helper, Live 0xf811a000
i2c_algo_bit 13198 1 gma500_gfx, Live 0xf809a000
i2c_core 33926 5 i2c_isch,gma500_gfx,drm_kms_helper,drm,i2c_algo_bit,
Live 0xf80c8000
thermal 18231 0 - Live 0xf80be000
video 18889 1 poulsbo, Live 0xf80a3000
processor 43535 1 acpi_cpufreq, Live 0xf80b2000
thermal_sys 19936 3 thermal,video,processor, Live 0xf8027000
hwmon 12912 2 coretemp,thermal_sys, Live 0xf8091000
...
12: PCI 02.0: 0300 VGA compatible controller (VGA)
[Created at pci.319]
Unique ID: _Znp.DlGhUSFiV2D
SysFS ID: /devices/pci0000:00/0000:00:02.0
SysFS BusID: 0000:00:02.0
Hardware Class: graphics card
Model: "Intel System Controller Hub (SCH Poulsbo) Graphics Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x8108 "System Controller Hub (SCH Poulsbo) Graphics
Controller"
SubVendor: pci 0x8086 "Intel Corporation"
SubDevice: pci 0x8119
Revision: 0x07
Driver: "gma500"
Driver Modules: "drm"
Memory Range: 0xd0080000-0xd00fffff (rw,non-prefetchable)
I/O Ports: 0x1800-0x1807 (rw)
Memory Range: 0xc0000000-0xcfffffff (rw,non-prefetchable)
Memory Range: 0xd0040000-0xd007ffff (rw,non-prefetchable)
IRQ: 16 (no events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v00008086d00008108sv00008086sd00008119bc03sc00i00"
Driver Info #0:
Driver Status: gma500_gfx is active
Driver Activation Cmd: "modprobe gma500_gfx"
Driver Info #1:
Driver Status: poulsbo is active
Driver Activation Cmd: "modprobe poulsbo"
Config Status: cfg=no, avail=yes, need=no, active=unknown
Robert
I can not read this
|
|
