MESSAGE
| DATE | 2007-11-24 |
| FROM | Ruben Safir
|
| SUBJECT | Subject: [NYLXS - HANGOUT] Re: [opensuse] Kernel Update and USB Mouse on SuSE 9.3
|
On Fri, Nov 23, 2007 at 06:46:17PM -0600, K.R. Foley wrote:
> Ruben Safir wrote:
> > On Fri, Nov 23, 2007 at 04:00:17PM -0600, K.R. Foley wrote:
> >> Ruben Safir wrote:
> >>> On Fri, Nov 23, 2007 at 01:03:35PM -0600, K.R. Foley wrote:
> >>>> Ruben Safir wrote:
> >>>>> Hello
> >>>>>
> >>>>> I've update my kernel to get it to function with new hardware and the modules for my eepro100
> >>>>> and USB mouse aren't working now. Where is the scripts that initiate these things so that I
> >>>>> fix this. It doesn't seem to be in the /etc/rc.d/ directory, or at least I can't seem to find it with
> >>>>> Grep.
> >>>>>
> >>>>> Ruben
> >>>> What version of the kernel?
> >>>>
> >>>> I believe the problem that you are having is probably the difference in
> >>>> the way devices are detected and initialized (ie. udev). I had similar
> >>>> problems after going past a certain kernel version (maybe 2.6.18) on
> >>>> 9.3. I was able to work around this problem by adding the device drivers
> >>>> for the devices to the MODULES_LOADED_ON_BOOT="capability raw1394
> >>>> video1394 sis900" in /etc/sysconfig/kernel.
> >>>>
> >>>
> >>> I added eepro100 which is a working module into the initrd line of the kernel file, but the system still isn't initializing the
> >>> ethernet card prior to me running modprobe on the command line. I looked into the config files under network and still find no
> >>> place where it does a probe for the card and loads modules.
> >>>
> >>> Any further thoughts?
> >>>
> >> Did you just add it to the INITRD line or did you add it to the
> >> MODULES_LOADED_ON_BOOT line like I suggested above. If you add it to
> >> that line there is no need to do a modprobe because the module gets
> >> loaded every time. The script you are looking for is
> >> /etc/init.d/network, but it doesn't do a modprobe. Udev is SUPPOSED to
> >> cause the module to load when the hardware scan happens, but in newer
> >> kernels things have changed.
> >>
> >
> > Thanks. Your right. The only thing is that currently that line is a blank
> > string which means until now that system wasn't depending on that in order to
> > run. It's been loading the module from elsewhere. I'm going to change that
> > line for the network card. The USB mouse, however, looks like a more
> > complicated problem. I found on the web the following howto instruction:
> >
>
> I understand that the line may have been blank before. However, there is
> an incompatibility between the initialization on 9.3 and the newer
> kernel. There is no easy fix for that.
>
> As for the mouse, I have never had to specifically load a USB mouse
> driver on my 9.3 system running newer kernels. You do however have to
> have the kernel properly configured. How did you configure the kernel?
> Did you start with your existing kernel config as a baseline? You can do
> that by copying /boot/config-`uname -r` to srcdir/config and then do
> 'make oldconfig'.
>
Thanks
I configured it at baseline with make menuconfig. I got the mouse working
but I had to turn on the uhci-hcb module by hand. Then it worked. I'm guessing
I'm going to need to put that also in the sysconf. This will blow up my
ability to rapidly switch kernels, but if it works it will be worth it.
Now if I could get the 5:1 sound to work on this audigy se card.
I'm sure there will be further shake outs as well.
Thank you for taking all this time out to help me.
Ruben
>
> --
> kr
--
http://www.mrbrklyn.com - Interesting Stuff
http://www.nylxs.com - Leadership Development in Free Software
So many immigrant groups have swept through our town that Brooklyn, like Atlantis, reaches mythological proportions in the mind of the world - RI Safir 1998
http://fairuse.nylxs.com DRM is THEFT - We are the STAKEHOLDERS - RI Safir 2002
"Yeah - I write Free Software...so SUE ME"
"The tremendous problem we face is that we are becoming sharecroppers to our own cultural heritage -- we need the ability to participate in our own society."
"> I'm an engineer. I choose the best tool for the job, politics be damned.<
You must be a stupid engineer then, because politcs and technology have been attached at the hip since the 1st dynasty in Ancient Egypt. I guess you missed that one."
© Copyright for the Digital Millennium
|
|
