MESSAGE
| DATE | 2003-02-26 |
| FROM | vin
|
| SUBJECT | Subject: [hangout] fstab help
|
Here's the fstab entry on my cd burner:
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
Can someone supply a suggestion as to what the correct setting would be to
make this writeable? I've tried help, info, the man pages, searching
newsgroup postings, asking in the newsgroups (a while ago), and can't seem to
get this to work.
The drive is a 24x10x40 burner. I pulled the plug on the cd rom drive, so
that the cd burner shows up in the fstab above. Prior to pulling the plug, I
had the cd burner on one channel, and the cd rom on the other channel. Both
cd drives would show up in the startup log, but the fstab only showed the
cd-rom. I tried manually adding the cd burner in fstab with the prior setup,
but I couldn't get it to work under any example I found in the sources listed
above. So currently, I have the cd burner only plugged in. I can live with
this if I could just get the burner to work.
If someone has a working setup with two cd drives, one or both being a burner,
I'd appreciate seeing the fstab file entries. Especially if you have a mixed
ata/ide drive and scsi drive setup.
Here's mine (slight changes to keep away the crackers):
/dev/sda8 / reiserfs defaults 1 2
/dev/sda6 /boot reiserfs defaults 1 2
devpts /dev/pts devpts defaults 0 0
/dev/sda10 /home reiserfs defaults 1 2
/dev/sda9 /homeb vfat noauto,user 0 0
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
usbdevfs /proc/bus/usb usbdevfs noauto 0 0
proc /proc proc defaults 0 0
/dev/sda1 /raidold vfat noauto,user 0 0
/dev/sda5 /raidold2 vfat noauto,user 0 0
/dev/sda11 /raidold3 vfat noauto,user 0 0
/dev/hdc1 /wmx vfat noauto,user 0 0
/dev/sda7 swap swap pri=42 0 0
____________________________
NYLXS: New Yorker Free Software Users Scene
Fair Use -
because it's either fair use or useless....
NYLXS is a trademark of NYLXS, Inc
|
|
